-13% BatteryProtect 12/24V-220A

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Delayed alarm output: The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect: The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

12/24V auto ranging: The BatteryProtect automatically detects system voltage

Over voltage protection: To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.

Write a review

Note: HTML is not translated!
    Bad           Good

For Help, Please contact the office on 0141 280 5454

BatteryProtect 12/24V-220A

  • Views: 291
  • Product Code: BatteryProtect 12/24V-220A
  • SKU: BPR000220400
  • Availability: In Stock
  • £115.20
  • £100.80
  • Ex Tax: £84.00
  • 1 or more £100.80