-13% BlueSolar MPPT 150/85 CAN-bus

PV voltage up to 150 V: The BlueSolar MPPT 150/70 and 150/85 charge controllers will charge a lower nominal-voltage battery from a higher nominal voltage PV array. The controller will automatically adjust to a 12, 24, 36, or 48V nominal battery voltage.

Ultra-fast Maximum Power Point Tracking (MPPT): Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT’s tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency: Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).

Flexible charge algorithm: Several preconfigured algorithms. One user programmable algorithm. Manual or automatic equalisation. Battery temperature sensor. Battery voltage sense option.

Programmable auxiliary relay: For alarm or generator start purposes

Extensive electronic protection: Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. Reverse current protection.

CAN bus: To parallel up to 25 units, to connect to a ColorControl panel or to connect to a CAN bus network

Write a review

Note: HTML is not translated!
    Bad           Good

For Help, Please contact the office on 0141 280 5454

BlueSolar MPPT 150/85 CAN-bus

  • Views: 359
  • Product Code: BlueSolar MPPT 150/85 CAN-bus
  • SKU: SCC010085000
  • Availability: In Stock
  • £840.00
  • £735.00
  • Ex Tax: £612.50
  • 1 or more £735.00