275 Wp REC Twin Peak 2 Module, Black Frame & Black Backsheet


REC TwinPeak Series solar panels feature an innovative design with high panel efficiency and power output, enabling customers to get the most out of the space used for the installation.

This has been achieved through reducing resistance at both cell and panel levels, exposure of more cell area to sunlight and increasing the amount of light absorbed. Together, these technology enablers ensure that the REC TwinPeak Series provides a higher energy yield throughout the day when compared to standard panels, and a higher energy yield, means a higher rate of return on a solar installation.

Combined with industry-leading product quality and the reliability of a strong and established European brand, REC TwinPeak panels are ideal for residential and commercial rooftops worldwide.

Features & Benefits

Half-cut cells (120 per panel) to give:

Reduced resistance = reduced power loss

Higher fill factor = better energy yield especially at times of high irradiance

Better shading performance


PERC (Passivated Emitter Rear Cell, also known as Backside Passivation) for:


    • Higher efficiency
    • Less heat generated = more efficient conversion of light to electricity
    • More infrared light absorbed


More bus bars provide;


    • Lower cell resistance
    • Increased light capture by the cells
    • Improved efficiency and reliability


3 part split junction box design


    • Reduced internal panel resistance
    • Cooler panel temperature for increased reliability and greater power output


The REC TwinPeak 2 Series uses evolving REC TwinPeak technologies, including cells from larger wafers (156.75 mm), and five busbars – both firsts for REC products. These are in addition to the power-boosting standard features of REC TwinPeak panels:

  • Half-cut cell technology
  • PERC (Passivated Emitter Rear Cell) technology
  • Split junction box spread across the middle of the panel, allowing an innovative panel design

Together, these help the REC TwinPeak 2 Series deliver at least 20 Wp more per panel compared to standard 60-cell multicrystalline panels. Installers, EPCs, investors, and end customers will experience its advantages almost immediately, including lower balance of system costs and higher system yield thanks to its increased power output and improved performance in shaded conditions, enabled by the innovative ‘twin’ design.

As with all REC panels, the REC TwinPeak 2 is 100% free from potential induced degradation (PID), avoiding power losses even in the harshest conditions and environments in terms of high temperatures and humidity.

Module dimensions: 1675 x 997 x 38 mm



Write a review

Note: HTML is not translated!
    Bad           Good

For Help, Please contact the office on 0141 280 5454

275 Wp REC Twin Peak 2 Module, Black Frame & Black Backsheet

  • Views: 500
  • Product Code: REC-275TP2/BLK2
  • SKU: REC-275TP2/BLK2
  • Availability: In Stock
  • £182.08
  • Ex Tax: £151.73